Pirani Gauge (Low Pressure Gauge) MQC Video Notes By Ifinfotech | Shubham Kola

on
In Pirani Gauge diagram one arm of Wheatstone bridge is taken out in glass bottle, one end of this glass whose pressure is to determined. the temperature of heating element depends upon thermal conductivity of gas. thermal conductivity increases if gas pressure increases. hence if gas pressure increases, temp of heating element decreases which in term changes resistance of wire. this change in resistance of wire is determined by milli-ammeter. Pirani gauge is used to determine very low pressure.
pirani gauge,gauge,pirani gauge working,pirani gauge working principle,pirani gauge construction and working,pirani gauge animation,pirani gauge working animation,

Comments

Post a Comment

Popular Posts

Types of Drilling Machine Operations: Boring, Reaming, Counter Sinking, Spot Facing, Tapping | Manufacturing Processes

In todays session we learn about drilling machine operations like drilling, reaming, boring, counter sinking, counter boring, spot facing, Tapping operations. so first is drilling operations, in drilling we produce a cylindrical hole inside workpiece. Here, material is removed by rotating edge of cutting tool. And that rotating edge is called a drill. in drilling internal surface of hole is usually rough, and the hole is always bigger than drill size. next is Boring Operation, here we increase the diameter of the hole which was previously produced. Boring operation is done due to machining internal surface of hole which was produced by casting process. Boring operation is done due to correcting roundness of hole and finishing the hole correctly and for making it of required size. The boring tool has only one cutting edge. The boring tool is placed in a boring bar which has a tapered shank. The speed of the spindle in the boring is usually very less than the reaming. the Spot Facing Ope

All Lathe Machine Operations: Turning, Facing, Taper Turning, Boring, Knurling, Tapping, Forming

In todays session will learn about Lathe Machine Operations. Here Turning is the operation of removing excess material from workpiece to produce cylindrical surface to desired length. Facing is the Operation of reducing length of workpiece by feeding perpendicular to lathe axis. Chamfering is the Operation of getting a beveled surface at edge of cylindrical workpiece. Knurling is the Operation of obtaining a diamond shape on workpiece for gripping purpose. This is done to provide a better gripping surface when operated by hands. It is done using knurling tool. Thread cutting Operation is used to obtain continuous ”helical grooves” or ” threads’‘. Grooving Operation is the process of reducing diameter of workpiece over a narrow surface. Spring Winding is the process of making coiled spring by passing wire around mandrel which is revolved on chuck or between centers. Forming is the process of turning convex, concave, or any irregular shape. Drilling is the operation of producing

About Website

Engineering online courses, videos for competitive exams (SSC, Railway, Banking), CBSC Class 11-12 lectures (Mathematics , Physics, Chemistry).

Contact Form

Name

Email *

Message *